Water Heaters
GE ProfilePF40S10FPY01
ENERGY STAR certified · May 2025
- Annual energy use
- 724 kWh/yr
- Tank size
- 40 gal
- Uniform energy factor
- 3.1
Running cost calculator
Rate used: 13.120 ¢/kWh · Utah statewide average, EIA, July 2026.
Where your state sits among all 51
Typical cost to run a water heater in Utah · Cost to run a water heater in every state
Replacing an old water heater with this one? Savings calculator
How this is calculated
- Annual energy use is the figure ENERGY STAR lists for this model under typical test conditions. It is not measured in your home.
- Yearly cost = annual kWh × your rate. Monthly cost is the yearly cost divided by 12, a flat average. Five-year cost keeps the rate constant; prices will change.
- Statewide averages are not your utility’s tariff. Use your bill’s rate for a closer number.
- We do not estimate watts or hourly cost: the source data does not include them.
How it compares
Among 36 ENERGY STAR certified 120 volt integrated HPWH models with a similar tank size (30 to 50 gal), this one ranks 1st lowest in annual energy use.
- Median of these models
- 1072 kWh/yr
- This model vs the median
- -32%
- Uses less than
- 94% of them
At the rate used above (Utah statewide average, EIA, July 2026), that is about $45.66 a year less than the median of these models, $457 over ten years at today’s price.
Compared with every comparable model on the ENERGY STAR list, not only the ones published on this site. Same type, similar size.
Yearly cost by state
Same 724 kWh/yr at each state’s average residential price (2026-07).
Comparable models
Same type, within 25% of this model’s tank size.
Specifications
- Annual energy use
- 724 kWh/yrENERGY STAR estimated annual electricity use for the rated usage pattern
- Tank size
- 40 galStorage volume
- Uniform energy factor
- 3.1 Uniform Energy Factor
- Type
- 120 Volt Integrated HPWH
- Rated usage
- Low-Usage
- First-hour rating
- 46 gal
- Electric input
- 0.9 kW
- Maximum amps
- 7.5
- Input voltage
- 120
- Tank height
- 39.4 in
- Tank diameter
- 18.5 in
- Sound level
- 41
- Refrigerant
- R1234YF
- Connected
- Yes
- Markets
- United States
- Available on market
- 2025-05-27
- ENERGY STAR ID
- 4016265
Customer reviews
Be the first to review this appliance.
Write a review
Frequently asked questions
How much electricity does the GE Profile PF40S10FPY01 use?
ENERGY STAR lists 724 kWh per year under typical test conditions, as ENERGY STAR publishes it for the usage pattern of the rating. Your use will differ with household size, how much hot water you draw and the temperature of the room the heater sits in.
How much does it cost to run?
At statewide average residential prices, the listed annual use costs about $92.09 in Louisiana and $347.52 in Hawaii (EIA, 2026-07). Your own utility rate may be different; enter it in the calculator.
How does the GE Profile PF40S10FPY01 compare with similar models?
Among 36 ENERGY STAR certified 120 volt integrated HPWH models with a similar tank size, it ranks 1st lowest in annual energy use. Its 724 kWh per year is 32% below the median of 1072 kWh.
What does the uniform energy factor mean?
It is the hot water delivered for each unit of energy the water heater uses, so a higher number means lower running cost. This model is listed at 3.1. A heat pump water heater scores far above a conventional electric one because it moves heat instead of making it.
Learn more
Methodology and sources
Model data comes from the ENERGY STAR Certified Water Heaters dataset (EPA). Electricity prices are statewide average residential prices from the U.S. EIA, latest period July 2026. Values are stored locally and refreshed by scheduled imports. Missing values are left blank, never estimated.